logo
Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
цитата
Дом > продукты >
Локатор неисправностей кабеля
>
Cable Fault Locator with Adjustable ≥15kV Voltage for Outer Sleeve Failure Detection and TDR Technology

Cable Fault Locator with Adjustable ≥15kV Voltage for Outer Sleeve Failure Detection and TDR Technology

Детали продукта:
Место происхождения: Сиань Шэньси Китай
Фирменное наименование: XZH TEST
Сертификация: ISO CE
Номер модели: XHHG520
Подробная информация
Место происхождения:
Сиань Шэньси Китай
Фирменное наименование:
XZH TEST
Сертификация:
ISO CE
Номер модели:
XHHG520
Выделить:

High Light

Выделить:

Adjustable ≥15kV Cable Fault Locator

,

Outer sleeve failure Cable Fault Detector

,

TDR Cable Tester

Trading Information
Количество мин заказа:
1 комплект
Упаковывая детали:
Деревянная упаковка
Время доставки:
5-8 рабочих дней
Условия оплаты:
Т/Т
Поставка способности:
3000единиц/год
Характер продукции
XHHG520
Professional-grade cable fault locator designed for detecting and locating outer sleeve failures in high-voltage cables.
The cable outer sheath fault tester is designed based on the Murray bridge principle and can be used to locate breakdown points and defects in various wires and cables that are not broken down but have low insulation resistance values.
Features
  • Adjustable voltage output ≥15kV
  • Specialized for outer sleeve failure detection
  • Precision locating capabilities
  • Adjustable output voltage;
  • High accuracy and stability;
  •  Employs a high-sensitivity amplifier and galvanometer for balance indication;
  • Zero-point protection;
  • Automatic fault point detection, while retaining manual testing functionality;
Key Specification Value
Voltage Range ≥15kV (adjustable)
Primary Application Outer sleeve failure detection

Cable Fault Locator with Adjustable ≥15kV Voltage for Outer Sleeve Failure Detection and TDR Technology 0

The cable outer sheath fault tester is particularly suitable for:

1. High-resistance breakdown points in cables after installation, especially linear high-resistance breakdown points that are difficult to burn into low-resistance conditions, such as linear high-resistance breakdowns at cable joints.

2. Flashover-type breakdown points, where the constant current source can maintain the arc after breakdown, a stable current flows through the bridge, and the bridge has sufficient sensitivity.

3. Defects that have not yet broken down but have low resistance, such as insulation defects where a megohmmeter reveals a low cable resistance value, but the cable does not break down under operating voltage.

Cable Fault Locator with Adjustable ≥15kV Voltage for Outer Sleeve Failure Detection and TDR Technology 1